LIFT / CHECK / DUMP DC POWER UNITS

Lift, check, and dump units are the most commonly used power units. The displacements range from 0.1 GPM to 5 GPM. This type of unit is used in any application which requires pressure to lift, combined with the ability to hold the load and lower it on command. LCD circuits include integral 2-way, 2-position manual or solenoid actuated release valves, relief and check valves. In addition, a pressure compensating flow control valve can be inserted in the lowering valve cavity to control the lowering speed.

---

TYPICAL APPLICATIONS:

• Tailgate

• RV leveling

• Scissor lift

---